Removal Procedure
WARNING:
Refer to Brake Dust Warning .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (With J55) .
- Remove the front brake rotor. Refer to Front Brake Rotor Replacement (J55) .
- Clean the wheel speed sensor mounting area on the steering knuckle of any accumulated dirt and debris.
- Remove the wheel speed sensor bolt (1).
- Remove the wheel speed sensor from the wheel bearing and hub assembly.
- Release the wheel speed sensor harness clip (1) from the steering knuckle.
- Release the wheel speed sensor harness (1) from the steering knuckle.
- Disconnect the electrical connector and release the wheel speed sensor harness clip (2) from the steering knuckle bracket.