Component Testing

Relay Test

1. Ignition/Vehicle - Off
2. Remove the component:KR5 Rear Defogger Relay
3. Test for 70 to 110 ohms between the test points:Component terminal 85 & Component terminal 86
   • If not between 70 to 110 ohms 

     Replace the component:KR5 Rear Defogger Relay

   • If between 70 to 110 ohms 
4. Test for infinite resistance between the test points:
   • Component terminal 30&85
   • Component terminal 30&86
   • Component terminal 30&87
   • Component terminal 85&87
   • If less than infinite resistance 

     Replace the component:KR5 Rear Defogger Relay

   • If infinite resistance 
5. Connect a 3 A fused jumper wire between the test points:Component terminal 86 & 12 V

   Connect a jumper wire between the test points:Component terminal 85 & Ground

6. Test for less than 2 ohms between the test points:Component terminal 30 & Component terminal 87
   • If 2 ohms or greater 

     Replace the component:KR5 Rear Defogger Relay

   • If less than 2 ohms 
7. All OK.