LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XT5 Platinum >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Rear Window Replacement >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Glass and Sheet Metal Handling Warning .

    WARNING:

    Refer to Cracked Window Warning .

    NOTE:

    Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.

  1. Open the liftgate.
  2. Remove Liftgate Lower Trim Finish Panel Replacement
  3. Disconnect the electrical connectors.
  4. Remove Rear Window Wiper Motor Replacement
  5. Remove Rear End Spoiler Replacement
  6. Cover the seats and carpeting to protect from broken glass.
    7. NOTE:

    Keep the cutting edge of the tool against the rear window from inside the vehicle. This will allow the urethane adhesive to be separated from the window.

  7. Use BO 39032  stationary glass removal tool or equivalent in order to remove the window.
    • Leave a base of urethane on the pinchweld flange.
    • The only suitable lubrication is clear water.
    8. Fig 1: Locator Pins And Rear Window
    GM4282571Courtesy of GENERAL MOTORS COMPANY
  8. With an assistant, remove the locator pins (1) and rear window (2) from the vehicle.
scientia non olet · About LEMON Manuals