LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XT5 Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission Range Select System >> Diagnostic Information and Procedures >> DTC P082A-P082F: Transmission Range Selector X-Y Position Sensor 1 Circuits >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Transmission Gear Lever X Position 1 Duty Cycle and Transmission Gear Lever Y Position 1 Duty Cycle parameters are between 5% and 95% and duty cycle changes when gear lever is moved to different positions.
    • If Transmission Gear Lever X Position 1 Duty Cycle is less than 5% or greater than 95% or does not change 

      Refer to Circuit/System Testing for Transmission Range Selector X Position Sensor 1.

    • If Transmission Gear Lever Y Position 1 Duty Cycle is less than 5% or greater than 95% or does not change 

      Refer to Circuit/System Testing for Transmission Range Selector Y Position Sensor 1.

    • If both parameters are between 5% and 95% and change but the DTC is still present 

      Refer to Circuit/System Testing for the appropriate sensor.

    • If both parameters are between 5% and 95% and change with no DTC present 
  3. All OK.
scientia non olet · About LEMON Manuals