Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Caliper Piston Dust Boot Seal |
| Brake Caliper Piston Seal |
| Brake Hose Fitting Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Guide Pin Bolt - JD9 (Rear) | 52 N.m (38 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Bleeder Valve - J95 (Front and Rear) | 10 N.m (89 lb in) |
| Brake Caliper Bleeder Valve - JD9 (Front) | 14 N.m (124 lb in) |
| Brake Caliper Bleeder Valve - JD9 (Rear) | 12 N.m (106 lb in) |
| Brake Caliper Bracket Bolt - JD9 (Front) | 230 N.m (170 lb ft) |
| Brake Caliper Bracket Bolt - J95 (Front and Rear) | 300 N.m (221 lb ft) |
| Brake Caliper Bracket Bolt - JD9 (Rear) | 200 N.m (148 lb ft) |
| Brake Caliper Guide Pin - J95 (Front and Rear) | 105 N.m (77 lb ft) |
| Brake Caliper Guide Pin Bolt - JD9 (Front) | 100 N.m (74 lb ft) |
| Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Brake Rotor Bolt - JD9, J95 (Front) | 12 N.m (106 lb in) |
| Rear Brake Shield Bolt - JD9 | 9 N.m (80 lb in) |
| Rear Brake Shield Bolt - J95 | 10 N.m (89 lb in) |