LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> Escalade Base, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Wheel Speed Sensor Reluctor Ring Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (6-Lug Wheel)Tire and Wheel Removal and Installation (8-Lug Wheel) .
  3. Remove the rear axle housing cover. Refer to Rear Axle Housing Cover Replacement (8.6/9.5/9.7 Inch Axle)Rear Axle Housing Cover Replacement (10.5 Inch Axle) .
  4. Remove the axle shaft. Refer to Rear Axle Shaft Replacement .
    5. Fig 1: Removing Wheel Speed Sensor Ring From Axle Housing
    GM889095Courtesy of GENERAL MOTORS COMPANY
  5. Using the J-45857  remover (1) and the J-2619 - 01  hammer (2), remove axle shaft seal and bearing first, then follow with removal of reluctor/wheel speed sensor ring.
scientia non olet · About LEMON Manuals