LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Antilock Brake System) >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electronic Brake Control Module
    GM4138356Courtesy of GENERAL MOTORS COMPANY
  1. Install Electronic Brake Control Module (1)
    2. Fig 2: Electronic Brake Control Module Bolts
    GM4138355Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution

  2. Install and tighten Electronic Brake Control Module Bolts (1) (Qty: 4) to 3 N.m (27 lb in)
  3. Connect the EBCM electrical connector.
  4. Program the EBCM. Refer to Control Module References
scientia non olet · About LEMON Manuals