Installation Procedure
- Install the fuel tank filler pipe (4) to the vehicle.
- Install the fuel tank vent hose (2) to the fuel tank filler pipe. Plastic Collar Quick Connect Fitting Service
- Install the fuel tank filler pipe fastener (1) and tighten to 9 N.m (80 lb in).
- Install NEW tie straps (3) that attach the evaporative emission canister purge pipe and fuel tank vent hose to the fuel tank filler pipe.
- Install the right rear wheelhouse panel liner. Rear Wheelhouse Liner Replacement
- Install the fuel tank filler pipe housing. Fuel Tank Filler Pipe Housing Replacement
- Install the fuel tank filler pipe (3) to the fuel tank.
- Install the fuel tank filler pipe clamp (2).
- Install the fuel tank filler pipe fastener (1) and tighten to 9 N.m (80 lb in).
- Remove the drain pan.
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .