Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Base) and Lifting and Jacking the Vehicle (V-Series)
Remove the applicable front wheel house liner. Refer to Front Wheelhouse Liner Replacement (Non V-Series) and Front Wheelhouse Liner Replacement (V-Series)
Disconnect the electrical connector (1) from the electronic level sensor.

Fig 1: Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Disconnect the level sensor link (1) from the lower control arm ball stud (2).

Fig 2: Level Sensor Link And Lower Control Arm Ball Stud
Courtesy of GENERAL MOTORS COMPANY
Loosen the level sensor nut (1).

Fig 3: Level Sensor Nut, Level Sensor Positioning Stud And Frame Rail
Courtesy of GENERAL MOTORS COMPANY
Remove the level sensor positioning stud (2) from the slot in the frame rail (3) by sliding it toward the control arm.