LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Object Detection System And Pedestrian Protection System - Repair Instructions) >> Repair Instructions >> Front Parking Assist Alarm Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement (CTS) and Front Bumper Fascia Replacement (CTS-V) .
    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect electrical from the front object alarm sensor.
  3. Lift the locking tabs on the housing and remove the front object alarm sensor.
scientia non olet · About LEMON Manuals