Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Push forward the front battery tray bracket (3) and install the battery (1) into position using the battery assist handles (2).

Fig 1: Battery Tray Front Bracket
Courtesy of GENERAL MOTORS COMPANY
Install the battery hold down bracket (2) and tighten the fastener (1) to 9 N.m (80 lb in).

Fig 2: Battery Hold Down Bracket Fastener And Vent Hose
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Install the battery vent hose (3) to the side of the battery.
Install the battery fuse block (1) to the battery with the retaining clips (2).

Fig 3: Battery Fuse Block Retainer Clips
Courtesy of GENERAL MOTORS COMPANY
Tighten the battery post clamp fastener (2) to 7 N.m (62 lb in).

Fig 4: Battery Fuse Block
Courtesy of GENERAL MOTORS COMPANY
Close the fuse block cover (1).
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Position the left side rear compartment trim panel. Refer to Rear Compartment Side Trim Replacement - Left Side .