LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9) Battery Negative Cable Disconnection and Connection (with KL9) .
  2. Remove the left rear compartment side trim panel. Refer to Rear Compartment Side Trim Replacement - Left Side .
    3. Fig 1: Body Harness Connector At Battery Current Sensor
    GM3461597Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the body harness connector (6) from the battery current sensor (5).
  4. Remove the body harness ground terminal fastener (3) and remove the body harness terminal (4) from the battery negative cable.
  5. Remove the battery negative cable ground fastener (2) and remove the battery negative cable (1) from the rear compartment.
    6. Fig 2: Battery Negative Cable And Battery Current Sensor
    GM3461598Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the position of the battery current sensor when removing, with the tab facing downwards.

  6. If replacing the battery negative cable (2), slide the battery current sensor (1) off the battery negative cable.
scientia non olet · About LEMON Manuals