LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (CTS)Lifting and Jacking the Vehicle (CTS-V) .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
    4. Fig 1: Wheel Speed Sensor Electrical Connector Clip
    GM2809432Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the wheel speed sensor electrical connector and release the connector clip (1) from the vehicle frame.
    5. Fig 2: Wheel Speed Sensor Harness Clip
    GM2809435Courtesy of GENERAL MOTORS COMPANY
  5. Release the wheel speed sensor harness clip (1) from the vehicle frame.
    6. Fig 3: Wheel Speed Sensor Harness Clips
    GM2809442Courtesy of GENERAL MOTORS COMPANY
  6. Release the wheel speed sensor harness clips (1) from the front brake hose.
    7. Fig 4: Wheel Speed Sensor Harness Retainer
    GM2809444Courtesy of GENERAL MOTORS COMPANY
  7. Release the wheel speed sensor harness retainer (1) from the strut bracket.
  8. Clean the wheel speed sensor mounting area on the steering knuckle of any accumulated dirt and debris.
    9. Fig 5: Wheel Speed Sensor Bolt
    GM2809446Courtesy of GENERAL MOTORS COMPANY
  9. Remove the wheel speed sensor bolt (1).
  10. Remove the wheel speed sensor from the steering knuckle.
scientia non olet · About LEMON Manuals