LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Advanced Parking Assist Alarm Sensor Replacement >> Installation Procedure

Installation Procedure

NOTE:

Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative

    Fig 1: Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  1. Insert the sensor into the housing.
  2. Connect the electrical connector to the front object alarm sensor.
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (CTS)Front Bumper Fascia Replacement (CTS-V) .
scientia non olet · About LEMON Manuals