Installation Procedure

Install the fuel injection fuel feed pipe dampener clip bracket (2).

Fig 1: Fuel Injection Fuel Feed Pipe Dampener Clip Bracket Bolt
Courtesy of GENERAL MOTORS COMPANY

NOTE: Perform steps 1 and 2 if the fuel injection fuel feed pipe dampener clip bracket was removed.
Install the fuel injection fuel feed pipe dampener clip bracket bolt (1) and tighten to 9 N.m (80 lb in).
CAUTION: Refer to Fastener Caution .
Fuel Injection Fuel Feed Pipe Dampener (1) @ Fuel Feed Pipe (2)» Connect - Metal Collar Quick Connect Fitting Service

Fig 2: Fuel Injection Fuel Feed Pipe Dampener
Courtesy of GENERAL MOTORS COMPANY
Fuel Feed Hose (1) @ Fuel Injection Fuel Feed Pipe Dampener (2)» Connect - Metal Collar Quick Connect Fitting Service

Fig 3: Fuel Feed Hose
Courtesy of GENERAL MOTORS COMPANY
Unclip and open the cover of the fuel feed hose clip bracket (1) and install the fuel injection fuel feed pipe dampener (2).

Fig 4: Fuel Injection Fuel Feed Pipe Dampener
Courtesy of GENERAL MOTORS COMPANY
Evaporative Emission Canister Purge Pipe» Install - Evaporative Emission Canister Purge Pipe Replacement
Intake Manifold Cover» Install - Intake Manifold Cover Replacement
Pressurize the fuel system and inspect for leaks.