LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CT6 Plug-In >> Repair and Diagnosis >> Electrical >> Body Electrical >> Hybrid/EV System Controls >> Diagnostic Information and Procedures >> DTC P0AB9: Hybrid/EV System Performance >> Circuit/System Verification

Circuit/System Verification

  1. Vehicle ON. Operate the hood release to open the hood. Depress and hold the accelerator pedal for more than 5 seconds. Under normal operation, the engine should start and run.
  2. Verify the engine starts and runs for at least 20 seconds.
    • If the engine fails to start and run for at least 20 seconds 

      Diagnose the engine and transmission systems. Perform the Engine Cranks But Does Not Run .

    • If the engine starts and runs for at least 20 seconds 
  3. Verify DTC P0AB9 is not set.
    • If the DTC is set 
    1. Program the T6 Power Inverter Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the T6 Power Inverter Module.
      • If the DTC does not set.
    3. All OK
    • If the DTC is not set 
  4. All OK