Circuit/System Verification

Ignition ON/Vehicle in Service Mode.
Verify DTC U151B, U1519 are not set.
- If DTC U151B, U1519 are set
  Refer to DTC U1500-U15FF .
- If DTC U151B, U1519 are not set
Verify the scan tool Mirror Direction Switch parameter changes from Inactive to Up, Down, Right, Left, Folding and Extending when cycling the S52 Outside Rearview Mirror Switch.
- If the parameter does not change
  Refer to Power Mirror Malfunction .
- If the parameter changes
Verify the A9A Outside Rearview Mirror-Driver and the A9B Outside Rearview Mirror-Passenger FOLD and EXTEND when cycling the S52 Outside Rearview Mirror Switch.
- If the A9A Outside Rearview Mirror-Driver does not FOLD and EXTEND
  Refer to Circuit/System Testing - Driver Outside Mirror Folding Command Malfunction.
- If the A9B Outside Rearview Mirror-Passenger does not FOLD and EXTEND
  Refer to Circuit/System Testing - Passenger Outside Mirror Folding Command Malfunction.
- If the A9A Outside Rearview Mirror-Driver and A9B Outside Rearview Mirror-Passenger does FOLD and EXTEND
All OK.