LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CT6 Plug-In >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC B390D: Frontview Camera Module >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify there are no DTCs set, except for DTC B390D.
    • If no other DTCs are set 
  3. Calibrate the B174W Frontview Camera - Windshield. Refer to Front View Camera Module Learn (-HP9) and/or Front View Camera Module Learn (HP9) .
    NOTE: Before performing the calibration, verify that the B174W Frontview Camera - Windshield will not have difficulty seeing lane markings in front of the vehicle. If the view of the B174W Frontview Camera - Windshield is blocked with mud, dirt, snow, ice or slush, if the windshield is damaged or if weather limits visibility, such as while driving in fog, rain or snow conditions, the calibration procedure may not be able to be completed.
  4. Verify DTC B390D is not set
    • If DTC B390D is set 

      Replace the B174W Frontview Camera - Windshield.

    • If DTC B390D is not set 
  5. All OK.
scientia non olet · About LEMON Manuals