Safety Alert Seat Description and Operation

The active safety seat provides a vibration in the driver's seat bottom cushion to alert the driver of a number of concerns. There are two motors providing the vibration and are located on the left and right sides of the seat cushion. Depending on the alert, either the left, right or both motors will activate.

The active safety seat is made up of the following components:

• Seat Memory Control Module
• Haptic Seat Motor - Driver Left
• Haptic Seat Motor - Driver Right

Seat Memory Control Module 

The seat memory control module receives serial data messages from other modules and provides a voltage output to activate haptic signal motors. The seat memory control module will pulse the left, right or both motors with the number of pulses requested over serial data. The module monitors the circuits for open, short to ground and short to voltage conditions and will set DTCs if a problem is detected.

Haptic Seat Motor 

The motors are located in the driver's seat bottom cushion and are positioned on the left and right sides. The motors are connected to ground and receive voltage from the seat memory control module.