LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CT6 Plug-In >> Repair and Diagnosis (Single Page) >> Steering >> Steering Wheel And Steering Column >> Diagnostic Information and Procedures >> DTC B285A: Steering Column Position Module >> Component Testing >> Steering Column Tilt/Telescope Switch Test

Steering Column Tilt/Telescope Switch Test

  1. Ignition OFF, disconnect the harness connector at the S71 Steering Column Tilt and Telescope Switch.
  2. Test for infinite resistance between the low reference terminal G and each signal terminal with the S71 Steering Column Tilt and Telescope Switch in the released position.
    • If less than infinite resistance 

      Replace the S71 Steering Column Tilt and Telescope Switch.

    • If infinite resistance 
  3. Test for less than 2 Ω between the ground terminal G and each signal terminal with the S71 Steering Column Tilt and Telescope Switch in the pressed position.
    • If 2 Ω or greater 

      Replace the S71 Steering Column Tilt and Telescope Switch.

    • If less than 2 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals