Liftgate Control Module Scan Tool Information
Liftgate Module Scan Tool Data Parameters
| Parameter | Expected Value | Description |
|---|---|---|
| Operating Conditions: Ignition On/Vehicle in Service Mode. | ||
| Liftgate Supply Voltage 1 | 11.5-13.0V | The scan tool displays the battery system 1 voltage input to the liftgate module. |
| Liftgate Supply Voltage 2 | 11.5-13.0 V | The scan tool displays the battery system 2 voltage input to the liftgate module. |
| Liftgate Secondary Obstacle Detection | - | Not valid for this application. |
| Liftgate Latch Pawl Switch | Closed/Open | The scan tool displays Closed or Open. This is the state of the latch pawl switch depending upon if the rear compartment lid is in the open position or closed position |
| Liftgate Latch Ratchet Switch | Closed/Open | The scan tool displays Closed or Open. This is the state of the latch ratchet switch depending upon if the rear compartment lid is in the open position or closed position. |
| Liftgate Latch Sector Switch | - | Not valid for this application |
| Liftgate Open/Closed Position Learned | Yes | The scan tool displays Yes or No. This is the state of the liftgate module open/close position programming. |
| Liftgate Front Control Switch | Inactive | The scan tool displays Active or Inactive as the interior liftgate control switch is pressed and released. |
| Liftgate Handle Switch | Inactive | The scan tool displays Active or Inactive as the liftgate handle switch is pressed and released |
| Liftgate Rear Close Switch | Inactive | The scan tool displays Active or Inactive as the liftgate close switch is pressed and released. |
| Liftgate Mode Switch | - | Not valid for this application |
| Liftgate Object Detection Sensor Supply | - | Not valid for this application |
| Liftgate Angle Sensor Supply | Inactive | This is the state of the liftgate angle sensor supply |
| Liftgate Latch Motor Cinch Command | Inactive | This is the state of the liftgate latch motor cinch command |
| Liftgate Open/Close | Inactive | Changes from Inactive to Closed to Inactive as the liftgate control module commands the liftgate latch when rear compartment lid is pushed closed |
| Liftgate Latch Centering Commanded | Inactive | Changes from Inactive to Closed to Inactive as the liftgate control module commands the liftgate latch when rear compartment lid is pushed closed |
Liftgate Module Scan Tool Command Functions
| Scan Tool Output Control | Description |
|---|---|
| Open/Close | This will command the rear compartment lid to open and close. |
Liftgate Module Scan Tool Configuration/Reset Functions
| Scan Tool Output Control | Description |
|---|---|
| Liftgate Maximum Open Learn Position | This will command the rear compartment lid to open and close and to relearn the rear compartment lid travel limits. |