Circuit/System Verification
- Verify DTC B127A is not set. Since occurrences of this DTC can be caused by an incompatible or faulty USB device, review with the customer the conditions under which their concern occurred.
- If DTC B127A is set.
Refer to Circuit/System Testing.
- If DTC B127A is not set.
- If DTC B127A is set.
- Ignition ON, rear seat entertainment system ON.
- Connect the EL-50334-20 Multi-Media Interface Tester (MIT) to the rear seat entertainment system USB port and select the USB test mode.
- Verify the audio from the EL-50334-20 Multi-Media Interface Tester (MIT) is heard through the rear seat entertainment system while operating the system to play audio from the test tool.
- If audio is not heard from the test tool
Refer to Circuit/System Testing
- If audio is heard from the test tool
- If audio is not heard from the test tool
- All OK.