Circuit/System Testing
- Ignition OFF, disconnect the radio antenna coax cable from the A11 Radio and from the T23L Radio Antenna Amplifier-Left.
- Verify the antenna coax cable passes the coax cable component test. Refer to Component Testing .
- If the coax cable does not pass the test
Replace the antenna coax cable
- If the coax cable passes the test
- If the coax cable does not pass the test
- Connect the antenna coax cable to the A11 Radio. Ignition On/Vehicle in Service Mode. Infotainment system ON.
- Verify a test lamp illuminates between the antenna coax cable center terminal and ground at the T23L Radio Antenna Amplifier-Left connector.
- If the test lamp does not illuminate
Replace the A11 Radio.
- If the test lamp illuminates
- If the test lamp does not illuminate
- Test or replace the T23L Radio Antenna Amplifier-Left.