LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CT6 Plug-In >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC B1008: Calibration Data Not Programmed >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
    NOTE: Do not diagnose this DTC if set in history
  2. Verify that DTC B101E 42 is not set.
    • If the DTC is not set 
  3. Perform the Vehicle Yaw Sensor Learn procedure.
  4. Verify that DTC B1008 is not set.
    • If DTC is set 
    1. Calibrate the front camera module. Refer to Front View Camera Module Learn (-HP9) and/or Front View Camera Module Learn (HP9) .
    2. Verify the DTC does not set.
      • If the DTC sets, replace the B174W Frontview Camera - Windshield.
      • If the DTC does not set
    3. All OK.
    • If the DTC is not set 
  5. All OK.
scientia non olet · About LEMON Manuals