Calibration Procedure (Required for North American SPS users)

1. Apply the parking brake.
2. Place the transmission in Park (if applicable)
3. Place vehicle in ACCY Power Mode 
4. Install scan tool
5. Navigate to the module diagnostics menu
6. Select Frontview Camera Module
7. Select Configuration/ Reset Functions menu Item
8. Select the Frontview Camera Learn procedure and follow the directions displayed on the screen.
9. Drive the vehicle to complete calibration.

Once the procedure is complete, the amber indicator will turn off. Shortly after the green ready to assist light should turn on as long as all conditions are met for normal operation. The system is then ready to assist.