LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CT6 Base, 3.6L Eng VIN S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Hybrid/EV System Controls) >> Diagnostic Information and Procedures >> Drive Mode Select Switch Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Vehicle OFF, disconnect the harness connector at the S48E Multifunction Switch.
  2. Test for infinite resistance between the signal terminal 5 and the ground terminal 2 with the switch in the open position.
    • If less than infinite resistance 

      Replace the S48E Multifunction Switch.

    • If infinite resistance 
  3. Test for less than 2 Ω between the signal terminal 5 and the ground terminal 2 with the switch in the closed position.
    • If 2 Ω or greater 

      Replace the S48E Multifunction Switch.

    • If less than 2 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals