LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CT6 Base, 3.6L Eng VIN S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Plug-In Charging System) >> Repair Instructions >> Drive Motor Battery Charger Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disable the high voltage system. Refer to High Voltage Disabling
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  3. Remove and plug the generator control module inlet and outlet hoses (2), refer to Generator Control Module Coolant Outlet Hose Replacement (Inlet) and/or Generator Control Module Coolant Outlet Hose Replacement (Outlet)
    Fig 1: Generator Control Module Inlet And Outlet Hoses With Electrical Connectors
    GM4486354Courtesy of GENERAL MOTORS COMPANY
  4. Electrical Connector (1)» Disconnect [3x]
    NOTE: Do not contaminate electrical connectors with coolant.
  5. Drive Motor Battery Charger Fastener (1)» Remove [2x]
    Fig 2: Drive Motor Battery Charger And Fasteners
    GM4453885Courtesy of GENERAL MOTORS COMPANY
  6. Drive Motor Battery Charger Fastener (2)» Remove [2x]
  7. Drive Motor Battery Charger (3)» Remove
scientia non olet · About LEMON Manuals