LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> ATS Base, 2D Coupe, RWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Power Outlets) >> Repair Instructions >> Cigarette Lighter Receptacle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac CT6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cigarette Lighter Receptacle
    GM4236566Courtesy of GENERAL MOTORS COMPANY
  1. Route the connector through the retainer. Align the cigarette lighter receptacle (1) to the slots in the opening.
  2. Install the retainer by pressing into place fully seated.
  3. Connect the electrical connector to the receptacle.
  4. Align the tabs on the receptacle to the slots in the retainer. Install the receptacle (1) by pressing into place until fully seated.
  5. Connect Battery Negative Cable Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals