LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> ATS Base, 2D Coupe, RWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Lighting System - Repair Instructions) >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac CT6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Brake Pedal Position Sensor
    GM4249231Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Position the fork of the brake pedal position sensor over the brake pedal arm pin.

  1. Install Brake Pedal Position Sensor (1)
    2. Fig 2: Brake Pedal Position Sensor Bolt
    GM4249229Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  2. Install Brake Pedal Position Sensor Bolt (1) and tighten 2.5 N.m (22 lb in)
  3. Connect Brake Pedal Position Sensor Electrical Connector
  4. Install Body Control Module Bracket.Body Control Module Bracket Replacement
  5. Calibrate the brake pedal position sensor. Brake Pedal Position Sensor Calibration 
scientia non olet · About LEMON Manuals