LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> ATS Base, 2D Coupe, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P166F: Generator Information Not Programmed Engine Control Module (ECM) >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
    1. Configure the K20 Engine Control Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the K20 Engine Control Module.
      • If the DTC does not set
    3. All OK.
    • If DTC P166F is not set 
  2. All OK.
scientia non olet · About LEMON Manuals