LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> ATS Base, 2D Coupe, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets >> Repair Instructions >> Wireless Charging System Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Wireless Charging System Module And Bracket Bolt
    GM4789534Courtesy of GENERAL MOTORS COMPANY
  1. Install Wireless Charging System Module (2)
    2. CAUTION:

    Fastener Caution

  2. Install Wireless Charging System Module Bracket Bolt (1) and tighten 1 N.m (9 lb in)
  3. Connect the electrical connector.
    4. Fig 2: Instrument Panel Center Compartment Liner And Wireless Charging System Module Bracket Bolt
    GM4789530Courtesy of GENERAL MOTORS COMPANY
  4. Install Wireless Charging System Module Bracket (3)
  5. Install Wireless Charging System Module Bracket Bolt (2) and tighten 1 N.m (9 lb in)
  6. Install Instrument Panel Center Compartment Liner (1)
scientia non olet · About LEMON Manuals