LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> ATS Base, 2D Coupe, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Bracket Replacement >> Installation Procedure

Installation Procedure

  1. Pressing firmly by hand, install the EBCM bracket until the BPMV assembly is fully seated in the bracket insulators.
    2. Fig 1: EBCM/BPMV Bracket Bolt
    GM2809430Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the EBCM bracket bolt (1) and tighten to 8 N.m (71 lb in).
  3. Install the BPMV assembly. Refer to Brake Pressure Modulator Valve Replacement .
scientia non olet · About LEMON Manuals