Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

Fig 1: Inner Tie Rod And Jam Nut

GM2028016

Courtesy of GENERAL MOTORS COMPANY

Ensure that the steering wheel is set in a straight ahead position.
Loosen the tie rod jam nut (1).
Adjust the toe to specification by turning the inner tie rod (2). Refer to Wheel Alignment Specifications .

CAUTION:

Refer to Fastener Caution .

Tighten the tie rod jam nut (1) to 60 N.m (44 lb ft).
The steering angle sensor must be recentered, the steering stops must be relearned. Refer to Steering Wheel Angle Sensor Centering .