Manifold Absolute Pressure Sensor Replacement (Engine LF3)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LF3) . |
|
| 1 | Manifold Absolute Pressure Sensor Fastener
CAUTION:
Refer to Fastener Caution . Tighten: 10 N.m (89 lb in) |
| 2 | Manifold Absolute Pressure Sensor Procedure Disconnect the electrical wiring harness connector from the manifold absolute pressure sensor. |
| 3 | Manifold Absolute Pressure Sensor Seal Procedure If re-installing the sensor, inspect the sensor seal for damage and replace as necessary. |