LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> XTS Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System - Repair Instructions >> Repair Instructions >> Front Parking Assist Alarm Sensor Replacement >> Installation Procedure

Installation Procedure

    NOTE:

    Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative.

  1. Paint the front object alarm sensor.
  2. Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals.
    3. Fig 1: Front Object Alarm Sensor And Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  3. Insert the sensor into the housing.
  4. Connect the electrical connector to the front object alarm sensor.
  5. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals