Removal Procedure
- Run the window to the fully closed position.
- Remove the front side door trim panel. Refer to Front Side Door Trim Replacement .
- Remove the front side door garnish molding. Refer to Front Side Door Window Garnish Molding Replacement .
- Remove the water deflector.
- Remove the front side window inner sealing strip. Refer to Front Side Door Window Inner Sealing Strip Replacement .
- Tape the window in the closed position.
- Loosen the window regulator guide nuts 4 revolutions.
- Connect the door trim panel electrical connector.
- Using the power window switch, lower the window regulator to separate the window from the regulator guides.
- Remove the tape.
- Remove the window by tilting the window forward then pulling the window up and out of the door.
WARNING:
Refer to Glass and Sheet Metal Handling Warning .
WARNING:
Refer to Express Window Down Warning .