LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> CTS Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System - Repair Instructions >> Repair Instructions >> Advance Parking Assist Alarm Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement (CTS) and Front Bumper Fascia Replacement (CTS-V)
    Fig 1: View Of Rear Object Sensor
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect electrical from the front object alarm sensor.
  3. Lift the locking tabs on the housing and remove the front object alarm sensor.
scientia non olet · About LEMON Manuals