Installation Procedure

Position the level sensor stud (2) into the slot in frame rail (3) slide it toward the engine.

Fig 1: Level Sensor Nut, Level Sensor Positioning Stud And Frame Rail
Courtesy of GENERAL MOTORS COMPANY

NOTE: Ensure that the level senor is properly seated on the frame rail.
Tighten the level senor nut (1) to 9 N.m (80 lb in).
CAUTION: Refer to Fastener Caution
Install the level sensor link (1) on the lower control arm ball stud (2).

Fig 2: Level Sensor Link And Lower Control Arm Ball Stud
Courtesy of GENERAL MOTORS COMPANY
Reconnect the level sensor electrical connector (1) to the electronic level sensor.

Fig 3: Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Install the right front wheel house liner. Refer to Front Wheelhouse Liner Replacement (Non V-Series) and Front Wheelhouse Liner Replacement (V-Series) .
Remove the support and lower the vehicle.
Reprogram the level sensor.