LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> CTS Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LTG) >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the charge air cooler outlet air tube. Refer to Charge Air Cooler Outlet Air Tube Replacement .
  4. Disconnect the engine harness connector (1) and remove the B + generator protective boot (4).
    Fig 1: Engine Harness Connector
    GM2833767Courtesy of GENERAL MOTORS COMPANY
  5. Remove the fastener (3) and the engine harness battery positive terminal (2), from the back of the generator.
  6. Remove the generator mounting fasteners (1) and the engine harness bracket retainer (4).
    Fig 2: Generator Mounting Fasteners
    GM2833769Courtesy of GENERAL MOTORS COMPANY
  7. Remove the generator mounting fastener (2) and the generator mounting stud (3).
  8. Remove the generator (1) from the engine compartment.
    Fig 3: Generator
    GM2833771Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals