Installation Procedure

Install the generator (1) into position on the engine.

Fig 1: Generator
Courtesy of GENERAL MOTORS COMPANY
Install the generator mounting stud (3) and tighten to 9 N.m (80 lb in).

Fig 2: Generator Mounting Fasteners
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Install the engine harness bracket (4) and the generator mounting fasteners (1). Tighten to 22 N.m (16 lb ft).
Tighten the generator mounting fastener (2) to 22 N.m (16 lb ft).
Connect the engine harness connector (1) and the engine harness battery positive terminal (2) to the generator. Tighten the fastener (3) to 22 N.m (16 lb ft).

Fig 3: Engine Harness Connector
Courtesy of GENERAL MOTORS COMPANY
Install the generator B + protective boot (4).
Install the charge air cooler outlet air tube. Refer to Charge Air Cooler Outlet Air Tube Replacement .
Install the drive belt. Refer to Drive Belt Replacement .
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .