Removal Procedure
- Remove Rear Compartment Floor Panel Trim Rear Compartment Floor Panel Trim Replacement
- Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection
- Remove Spare Tire Stowage Retainer (1)
- Remove Spare Tire (2)
- Disengage Battery Distribution Fuse Block Cover Retaining Tab (1)
- Remove Battery Distribution Fuse Block Cover (2)
- Remove Battery Positive Cable Nut (1)
- Disengage Retainer (3)
- Remove Battery Positive Cable (2)
- Disengage Retainer (1)
- Disengage Rubber Grommet (2)
- Feed the battery positive cable through rear compartment opening.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove Fuel Tank (1) Fuel Tank Replacement
- Remove Front Body Exhaust Heat Shield - Left (3) Front Body Exhaust Heat Shield Replacement (Right Side, LTG)Front Body Exhaust Heat Shield Replacement (Left Side, LTG)Front Body Exhaust Heat Shield Replacement (Right Side, LGW, LGX)Front Body Exhaust Heat Shield Replacement (Left Side, LGW, LGX)
- Retainer (1)
- Release the clips with a suitable tool. (2)
- Remove the auxiliary A/C evaporator tube bracket fastener. (3)
- Disengage Retainer (1)
- Lower the vehicle.
- Disangege Retainer (1)
- Remove Power Distributor Fuse Block Cover (1)
- Remove Battery Positive Cable (1)
- Remove Battery Positive Cable (2)