LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> CT6 Base, 3.6L Eng VIN S >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets >> Repair Instructions >> Accessory Power Receptacle Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Accessory Power Receptacle
    GM4255927Courtesy of GENERAL MOTORS COMPANY
  1. Route the connector through the retainer. Align the accessory power receptacle (1) to the slots in the opening.
  2. Install the retainer by pressing into place fully seated.
  3. Connect the electrical connector to the receptacle.
  4. Align the tabs on the receptacle to the slots in the retainer. Install the receptacle (1) by pressing into place until fully seated.
  5. Connect Battery Negative Cable Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals