LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2015 >> ATS Base, 2D Coupe, RWD, Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left side rear compartment trim panel. Refer to Rear Compartment Side Trim Replacement - Left Side (Sedan with AM9)Rear Compartment Side Trim Replacement - Left Side (Sedan except AM9)Rear Compartment Side Trim Replacement - Left Side (Coupe) .
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Open the battery fuse block cover.
  4. Fig 1: Battery Positive Cable & Mounting Components
    GM2826793Courtesy of GENERAL MOTORS COMPANY
  5. Remove the battery positive cable fastener (1) from the battery fuse block (2).
  6. Detach the battery positive cable retainer (6) from the battery hold down bracket.
  7. Set aside the battery positive cable (7).
  8. Fig 2: Battery Fuse Block & Fastener
    GM2826794Courtesy of GENERAL MOTORS COMPANY
  9. Loosen the battery positive fuse block cable clamp fastener (1) and detach the battery fuse block (2) from the battery.
  10. Fig 3: Battery Hold Down Bracket Fastener And Vent Hose
    GM2826796Courtesy of GENERAL MOTORS COMPANY
  11. Remove the battery hold down bracket fastener (1) and remove the battery hold down bracket (2).
  12. Remove the battery vent hose (3) from the side of the battery.
  13. Fig 4: Battery Tray Front Bracket
    GM2826797Courtesy of GENERAL MOTORS COMPANY
  14. Push forward the battery tray front bracket (3) and remove the battery (1) using the battery assist handles (2).