LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> XTS Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Fixed And MOVEABLE Window System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2013 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window into the opening. Refer to Adhesive Installation of Rear Windows .
  2. Install the rear window lower seal.
  3. Connect the rear window defogger electrical connectors.
  4. Install the rear window radio antenna connector.
  5. Connect the OnStar® antenna, if equipped.

    Check the radio and OnStar® system to verify reception.

  6. Install the left and right inside body side rear window garnish molding. Refer to Body Side Rear Window Garnish Molding Replacement .
  7. Close the rear compartment lid.
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals