Front Side Door Window Regulator Replacement

Fig 1: Front Side Door Window Regulator & Mounting Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front side door trim panel. Refer to Front Side Door Trim Replacement .
1	Front Side Door Window Regulator Fastener (Qty: 2) WARNING: Refer to Glass and Sheet Metal Handling Warning . WARNING: Disconnect the power window switch when working inside the door. When operated, the Express Up/Down Feature allows the door window to move very quickly, without stopping, which could cause personal injury. CAUTION: Refer to Fastener Caution . Procedure Remove the water deflector. Position the window to access the 2 window guide retainers. Refer to Front Side Door Window Replacement . Push the window to the full up position and tape in place. NOTE: Leave the two upper bolts in the window regulator for alignment when installing. It maybe necessary to transfer the bolts if replacing the window regulator. Tighten 10 (89 lb in)
2	Front Side Door Window Regulator Bolt (Qty: 3) Procedure Disconnect the front side door window regulator electrical connector. Tighten 10 (89 lb in)
3	Front Side Door Window Regulator Procedure Transfer the power window motor and program after installing in the vehicle. Refer to Window Motor Programming - Express Function . NOTE: Inspect the door window for proper operation before installing the door trim panel.