Rear Camber Adjustment

Fig 1: Identifying Adjuster Cam Nut

Courtesy of GENERAL MOTORS COMPANY

Loosen the adjuster cam nut (1).
Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.

CAUTION:

NOTE:

Ensure that the camber settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.

Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1) to:
- First Pass: 70 (52 lb ft)
- Final Pass: plus 70 degrees
Check the toe alignment and adjust if required. Refer to Rear Toe Adjustment .
Test drive the vehicle.