Inside Rearview Mirror Replacement
Courtesy of GENERAL MOTORS COMPANY Inside Rearview Mirror Replacement
| Callout |
Component Name |
| 1 |
Inside Rearview Mirror Screw
Procedure
- Adjust the mirror to the full upward position.
- Using a plastic trim tool, carefully pry downward on the lower cover to gain access to the mirror.
- Disconnect the electrical connector.
- Loosen the set screw located at the base of the mirror.
Tighten
1.8 N.m (16 lb in) |
| 2 |
Inside Rearview Mirror Procedure
- Slide the mirror upward off of the rearview mirror button.
- Refer to Control Module References
for programming and setup information.
|