LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> ATS Base, 2.0L Eng VIN X, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LCV) >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the radiator surge tank. Refer to Radiator Surge Tank Replacement (LFX) , Radiator Surge Tank Replacement (LCV, LTG) .
    4. Fig 1: Engine Harness Connector
    GM2833767Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the engine harness connector (1) and remove the B + generator protective boot (4).
  5. Remove the fastener (3) and the engine harness battery positive terminal (2), from the back of the generator.
    6. Fig 2: Generator Mounting Fasteners
    GM2833769Courtesy of GENERAL MOTORS COMPANY
  6. Remove the generator mounting fasteners (1) and the engine harness bracket retainer (4).
  7. Remove the generator mounting fastener (2) and the generator mounting stud (3).
    8. Fig 3: Generator
    GM2833771Courtesy of GENERAL MOTORS COMPANY
  8. Remove the generator (1) from the engine compartment.
scientia non olet · About LEMON Manuals