LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> SRX Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L (LFX) - Repair Instructions >> Repair Instructions >> Fuel Pressure Relief

Fuel Pressure Relief

WARNING:

Fuel that flows out at high pressure can cause serious injury to the skin and eyes. ALWAYS depressurize the fuel system before removing components that are under high fuel pressure.

  1. Remove the fuel pump 20A fuse from the X53A fuse block - rear body label. Refer to Electrical Center Identification Views .
  2. Start the vehicle and allow the engine to idle until the engine stops. The engine will stop in approximately 20-30 seconds.
  3. Turn the ignition OFF.