LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> SRX Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
    3. Fig 1: View Of Starter & Heat Shield
    GM2196015Courtesy of GENERAL MOTORS COMPANY
  3. Remove the heat shield (2) from the starter.
  4. Remove the left catalytic cylinder head nuts and reposition catalytic converter away from cylinder head.
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  6. Disconnect the knock sensor connector.
    7. Fig 2: View Of Starter Solenoid, Engine Harness Connector & Battery Positive Nut
    GM2196014Courtesy of GENERAL MOTORS COMPANY
  7. Remove the battery positive nut (1) and the engine harness connector (2), from the starter solenoid (3).
    8. Fig 3: Starter Motor And Bolts
    GM2201749Courtesy of GENERAL MOTORS COMPANY
  8. Remove the starter motor bolts (1).
  9. Remove the starter motor (2).
scientia non olet · About LEMON Manuals